Question

1. The in-situ relative density of sand is 70% with a moisture content of 10%. It...

1. The in-situ relative density of sand is 70% with a moisture content of 10%. It is known that the maximum and minimum dry unit weights of that sand are 18.1 and 15.4 kN/m3 , respectively. For in-situ conditions calculate the moist unit weight of the sand.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
285 kg of wet sand with a water content of 18% was taken and dried in...
285 kg of wet sand with a water content of 18% was taken and dried in the oven. Width, length and height It was placed in a 58 cm steel tank. As a result of experiments of the sand used maximum dry unit volume weight 18,40 kN / m3 , maximum porosity as 44% and Gs = 2.71 It was found. Since the relative density of the sand in the tank is 0.49, the height of the sand in the...
A field density test on compacted, well-graded sand produced the following information: water content = 5%,...
A field density test on compacted, well-graded sand produced the following information: water content = 5%, total density = 112 pcf. Additional standardized tests were performed for determining the sand's relative density following ASTM D4253 and D4254, and these standardized tests produced a minimum dry density of 89 pcf and a maximum dry density of 115 pcf. The specific gravity of solids is 2.65 for this soil.Compute (a) the field dry density and void ratio, (b) min and max void...
A sandy soil has a maximum void ratio (emax) of 0.63 and a minimum void ratio...
A sandy soil has a maximum void ratio (emax) of 0.63 and a minimum void ratio (emin) of 0.36. The soil is compacted to a dry unit of 17.8 Kn/m3 at a moisture content of 18%. The specific gravity of the solids is 2.7. What is the relative density of the soil after compaction?
The maximum moisture content that can be tolerated in a wooden drum (1 ft in diameter...
The maximum moisture content that can be tolerated in a wooden drum (1 ft in diameter and 2 ft long) for use in a textile machine, is 20% per weight. The drum, initially having a moisture content of 35% (per weight), is placed in an oven where the moisture content is maintained at 5% (by weight). For how long the drum must be dried when: a) the ends of the drum are closed with a vapor barrier? b) the lateral...
A 70 m diameter tank will be filled with 9 m of water. The site consists...
A 70 m diameter tank will be filled with 9 m of water. The site consists of 20 m of sand overlying 20 m of clay, overlying another layer of sand. The water table is located at a depth of 10 m. The unit weights of the sand layers are 18 kN/m3 and the unit weight of the clay is 16 kN/m3. Other clay properties are given in Table 1. Please divide the clay layer into 4 or more sublayers...
3 A wide embankment 5m high is built on the ground described in the previous example....
3 A wide embankment 5m high is built on the ground described in the previous example. The material of this bank has a moisture content of 13% and a dry density of 1860kgm-3. Find the vertical effective stress in the clay at a depth of 7.33m below the original ground level. 4 A piezometer tip is set at 10m above datum into the top of a confined layer of sand. The water level in the piezometer is 40m above datum;...
The following table is showing the results of a standard proctor test. For each test, two...
The following table is showing the results of a standard proctor test. For each test, two different moisture contents were recorded, one from top and the other from the bottom of the sample. What are the maximum dry unit weight and optimum moisture content for this soil? Make sure to plot the compaction curve in order to determine the values. Sample No. 1 2 3 4 5 w (%) 7.5 9.8 8.6 10.3 11.12 11.9 13.3 14.11 16.7 15.99 γ...
b) A sample of moist soil has a mass of 18.18kg and occupies a total volume...
b) A sample of moist soil has a mass of 18.18kg and occupies a total volume of 0.009 m3. When dried in an oven, the dry mass is 16.13kg. The specific gravity of the soil solids is 2.70. (Acceleration of gravity, g = 9.81 m/sec2.) Determine: Wet density Dry unit weight Void ratio Water content Degree of saturation c) A 4.5 m deep deposit of silty sand lies above a 6 m deep deposit of gravel. The gravel is underlain...
... 00 E H.W 1. Design concrete mix according to ACI with volumetric equation, and calculate...
... 00 E H.W 1. Design concrete mix according to ACI with volumetric equation, and calculate the quantities of concrete ingredients for a slab and 5 bored piles (Show your results in a Table). Average compressive strength required at 28 days = 35 N / mm 'with Slump is (75-100). Dry rodded mass of coarse aggregate is 1600kg / m3. Fineness modulus of fine aggregate is 2.9. the concrete will be exposed to mild waves of freezing and thawing. The...
Air at 95°F, 1 atm, and 10% relative humidity enters an evaporative cooler operating at steady...
Air at 95°F, 1 atm, and 10% relative humidity enters an evaporative cooler operating at steady state. The volumetric flow rate of the incoming air is 1765 ft3/min. Liquid water at 68°F enters the cooler and fully evaporates. Moist air exits the cooler at 70°F, 1 atm. There is no significant heat transfer between the device and its surroundings and kinetic and potential energy effects can be neglected. a)Determine the mass flow rate of the dry air in lb(dry air)/min....
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT