Question

Sulfate, SO42- Add ½ mL 0.1M MgSO4 into a small test tube. Add ½ mL 0.1M...

Sulfate, SO42-

  1. Add ½ mL 0.1M MgSO4 into a small test tube.
  2. Add ½ mL 0.1M BaCl2 to same test tube.
  3. Mix thoroughly.
  4. Record your observations.
  5. Add 5 drops of 3M HCl
  6. Record your observations and results.

Carbonate, CO32-

  1. Add ½ mL of the 0.10 M NaHCO3 solution into a small test tube.
  2. Add 5 drops of 3M HCl.
  3. Record your observations and results.

Phosphate, PO43-

  1. Add ½ mL 0.1M Na3PO4 into a small test tube.
  2. Add ½ mL 0.1M Zn(C2H3O2)2 to same test tube.
  3. Mix thoroughly.
  4. Record your observations and results.

Iodide, I-

  1. Add ½ mL 0.1M NaI into a small test tube.
  2. Add 5 drops of chlorine water to the same test tube.
  3. Mix thoroughly.
  4. Add 15 drops of mineral oil.
  5. Mix thoroughly.
  6. Record your observations and results.

Anion tested

test

Observations

Test results

(+/-)

Results

analysis of observations

SO42-

SO42-

CO32-

CO32-

PO43-

PO43-

I -

I -

Homework Answers

Answer #1

I hope you need the observation table hence written as above. Please let me know if you have any specific questions as such in the comment section.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
1a) Ten drops of 1.0M Na2CO3 are placed into each of two small test tubes. To...
1a) Ten drops of 1.0M Na2CO3 are placed into each of two small test tubes. To the first test tube, 2 drops of 0.1 M Ca(NO3)2 is added, and to the second test tube, 2 drops of 0.1M Mg(NO3)2 is added. Describe the likely observations for each test tube and state how these results could or could not be used to distinguish between the cations. b) Six drops of 0.5M bromine in organic solvent is placed in each of two...
1a) Ten drops of 1.0M Na2CO3 are placed into each of two small test tubes. To...
1a) Ten drops of 1.0M Na2CO3 are placed into each of two small test tubes. To the first test tube, 2 drops of 0.1 M Ca(NO3)2 is added, and to the second test tube, 2 drops of 0.1M Mg(NO3)2 is added. Describe the likely observations for each test tube and state how these results could or could not be used to distinguish between the cations. b) Six drops of 0.5M bromine in organic solvent is placed in each of two...
ASAP FOR ALL QUESTIONS ABOUT THE Le Chatelier’s Principle LAB Procedure : I ) NaCl (s)...
ASAP FOR ALL QUESTIONS ABOUT THE Le Chatelier’s Principle LAB Procedure : I ) NaCl (s)   ßà   Na+ (aq)   + Cl- (aq)          *Add few drops of conc. HCl to 2 to 3 mL of saturated NaCl solution. II ) NH4Cl(s) ßà NH4+ (aq) + Cl-(aq)          *Add few drops of conc. HCl to 2 to 3 mL of saturated NH4Cl solution. III ) Fe+3(aq) + SCN-(aq) ßà Fe(SCN)+2(aq)          Prepare a stock solution by mixing 2mL each of 0.1M...
Procedure Reaction 1: Dissolving the Copper 1. Obtain a clean, dry, glass centrifuge tube. 2. Place...
Procedure Reaction 1: Dissolving the Copper 1. Obtain a clean, dry, glass centrifuge tube. 2. Place a piece of copper wire in a weighing paper, determine the mass of the wire and place it in the centrifuge tube. The copper wire should weigh less than 0.0200 grams. 3. In a fume hood, add seven drops of concentrated nitric acid to the reaction tube so that the copper metal dissolves completely. Describe your observations in the lab report. (Caution, Concentrated nitric...
Preparation of acetyl salicyclic acid (Aspirin) post-lab questions 1.) The FeCl3 test you performed on salicylic...
Preparation of acetyl salicyclic acid (Aspirin) post-lab questions 1.) The FeCl3 test you performed on salicylic acid, crude aspirin, and the purified aspirin gave different colors. Comment on the results you obtained in each of these tests in terms of colors and the functional groups present and what does that indicate about the purity of your purified aspirin? I got a dark purple color for saliclyc acid tube. "dark yellow" for crude aspirin tube, "llighter yellow" color for aspirin tube...
a)How is it possible to determine if CaCO3 is Cl- free after synthesis? b)How can the...
a)How is it possible to determine if CaCO3 is Cl- free after synthesis? b)How can the Cl- ions be remove from CaCO3 after synthesis? I should answer the questions from the following experiment but if you know the answer and you are sure, yo do not need to read experiment. Please answer correctly because i hav no chance to make wrong :(((( Physical and Chemical Properties of Pure Substances Objective The aim of today’s experiment is to learn handling chemicals...
I have provided the information for the lab below. I want to see the chemical reactions...
I have provided the information for the lab below. I want to see the chemical reactions that take place during each step of the experiment. So in the procedures when a chemical was added i would like to see what the products and byproducts that were formed. I also want to see one over all reaction for this experiment to just get an overview of what exactly is happening during the experiment. Thank you:) Part B: Synthesis of [Co(NH3)5Cl]Cl2 Objective:...
1.) You will work with 0.10 M acetic acid and 17 M acetic acid in this...
1.) You will work with 0.10 M acetic acid and 17 M acetic acid in this experiment. What is the relationship between concentration and ionization? Explain the reason for this relationship 2.) Explain hydrolysis, i.e, what types of molecules undergo hydrolysis (be specific) and show equations for reactions of acid, base, and salt hydrolysis not used as examples in the introduction to this experiment 3.) In Part C: Hydrolysis of Salts, you will calibrate the pH probe prior to testing...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT