Question

A cylindrical specimen of a brass alloy 10.2 mm (0.4016 in.) in diameter and 120.1 mm...

A cylindrical specimen of a brass alloy 10.2 mm (0.4016 in.) in diameter and 120.1 mm (4.728 in.) long is pulled in tension with a force of 12300 N (2765 lbf); the force is subsequently released. The tensile stress-strain behavior for this alloy is shown in the Animated Figure 6.12. Compute the final length of the specimen at this time.

Science   Chemistry   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A cylindrical specimen of a brass alloy 10.2 mm (0.4016 in.) in diameter and 120.1 mm...
A cylindrical specimen of a brass alloy 10.2 mm (0.4016 in.) in diameter and 120.1 mm (4.728 in.) long is pulled in tension with a force of 12300 N (2765 lbf); the force is subsequently released. Compute the final length of the specimen at this time. answer in mm.
A cylindrical specimen of a metal alloy 45.3 mm long and 9.72 mm in diameter is...
A cylindrical specimen of a metal alloy 45.3 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 372 MPa causes the specimen to plastically elongate to a length of 54.2 mm. If it is known that the strain-hardening exponent for this alloy is 0.2, calculate the true stress (in MPa) necessary to plastically elongate a specimen of this same material from a length of 45.3 mm to a length of 57.6 mm.
Problem. A cylindrical specimen of a hypothetical metal having a diameter of 7.671 mm and a...
Problem. A cylindrical specimen of a hypothetical metal having a diameter of 7.671 mm and a gauge length of 251.905 mm is pulled in tension. Use the load–elongation characteristics shown in the following table to complete parts (a) through (f). (a) Plot the data as stress (MPa) versus strain (b) Compute the modulus of elasticity in GPa (c) Determine the yield strength at a strain offset of 0.002 (d) Determine the tensile strength of this alloy (e) What is the...
A cylindrical specimen of stainless steel having diameter of 12.8 mm and a guage length of...
A cylindrical specimen of stainless steel having diameter of 12.8 mm and a guage length of 50.88 mm(2.000in.) is pulled in tension. Use the load-elongation characterisitcs shown in the following table. Plot the data as engineering stress vs. engineering strain. Then compute the modulus of elasticity, yeild strength at a strain offset of 0.002, determine the tensile strength of this alloy, approximate ductility in percent elongation and the modulus of resilience. N mm 0 50.8 12700 50.825 25400 50.851 38100...
A cylindrical specimen of some metal alloy 8.6 mm in diameter is stressed in tension. A...
A cylindrical specimen of some metal alloy 8.6 mm in diameter is stressed in tension. A force of 9070 N produces an elastic reduction in specimen diameter of 0.0048 mm. Calculate the elastic modulus (in GPa) of this material if its Poisson's ratio is 0.33.
A tensile test is done on a tensile specimen with a gauge diameter of 8 mm...
A tensile test is done on a tensile specimen with a gauge diameter of 8 mm and gauge length of 45 mm was tested at a temperature above the recrystallization temperature. The test was done at a constant speed of 8 mm/min, strength constant C = 210MPa and strain rate sensitivity exponent m = 0.22. As the gauge length extends to 80 mm then find: The gauge diameter (mm). Tensile force (N). Average flow stress (MPa).
A rod of brass originally 600 mm long is pulled in tension along its longitudinal axis...
A rod of brass originally 600 mm long is pulled in tension along its longitudinal axis with a stress of 45 MPa. What will be the length of the rod when the stress is applied? A rod of Titanium with a diameter of 6 mm and a length of 300 mm is subjected to an elastic force of 5000 N. a) Estimate the diameter of the rod when the load has been applied. b) What is the diameter of the...
Computer electrical conductivity of a Cylindrical silicone specimen 10 mm in diameter and 60 mm in...
Computer electrical conductivity of a Cylindrical silicone specimen 10 mm in diameter and 60 mm in length in which a current of .25 A’s passes in an axial direction. A voltage of 24 V is measured across to probes that are separated by 45 mm. Compute the resistance over the entire 60 mm of the specimen. If the SI specimen has a carrier concentration of 1.5×10^10 m^-3, what is the electron mobility?
Q3: Tension test was conducted on a mild steel rod having diameter 1.5 cm and length...
Q3: Tension test was conducted on a mild steel rod having diameter 1.5 cm and length 20 cm. While applying a load of 10 kN, there will be an extension of 0.012 cm on a length of 20 cm. Maximum load carried by the rod was found to be 26 kN and the load beyond which stress is not proportional to strain was observed to be 11 kN. When the specimen breaks, the extension of the rod for 20 cm...
Consider the 1040 carbon steel listed in Table 6.1. (a) A 20-mm-diameter bar of this alloy...
Consider the 1040 carbon steel listed in Table 6.1. (a) A 20-mm-diameter bar of this alloy is used as a structural member in an engineering design. The unstressed length of the bar is precisely 1 m. The structural load on the bar is 1 .2 x 10^5 N in tension. What will be the length of the bar under this structural load? (b) A design engineer is considering a structural change that will increase the tensile load on this member....
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT