Question

Energy and changes of state. - determine the energy lost when 45.0g of steam at 111C...

Energy and changes of state.

- determine the energy lost when 45.0g of steam at 111C is cooled to solid water at -4C, draw the cooling curve
Science   Chemistry   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
What is the total energy in kj lost when 10 grams of benzene is condensed at...
What is the total energy in kj lost when 10 grams of benzene is condensed at 80.1 degrees Celsius, cooled to a melting point of negative 5.1 degrees Celsius and frozen to a solid. Heat of Fusion for benzene= 128 J/g, Heat of Evaporation for benzene= 395 J/g, Specific Heat of benzene= 1.95 J/g degree Celsius
How many J of energy must be removed when 194.0 g of steam, at a temperature...
How many J of energy must be removed when 194.0 g of steam, at a temperature of 153.0 degrees Celsius, is cooled and frozen into 194.0 g of ice at 0 degrees Celsius? Take the specific heat of steam to be 2.1kJ/(kg*K).
To understand the role of latent in phase changes, consider the energy required to convert a...
To understand the role of latent in phase changes, consider the energy required to convert a 5.0g cube of ice at -40C to steam at 200C. How can you evaluate the amount of heat energy required during phase change from -40C ice changed to 0C ice, 5.0g of ice melted to water at 0.0C, 0C water changes to 100C, water converted to steam at 100.0C, and steam at 100C changed to 200C?
A nuclear power plant generates 3000 MW of heat energy from nuclear reactions in the reactor's...
A nuclear power plant generates 3000 MW of heat energy from nuclear reactions in the reactor's core. This energy is used to boil water and produce high-pressure steam at 300?C . The steam spins a turbine, which produces 900MW of electric power, then the steam is condensed and the water is cooled to 25?C before starting the cycle again. A) What is the maximum possible thermal efficiency of the power plant? Express your answer using two significant figures. B) Cooling...
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa....
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa. The Turbine has an isentropic efficiency of 85% and exhausts at 15 kPa. In the condenser, the water is subcooled to 38°C by lake water at 13°C. The pump isentropic efficiency is 75%. a) Draw and label the T-s diagram for this cycle b) Determine the cycle’s thermal efficiency c) Determine the mass flow rate of the steam in the boiler (kg/h) d) Determine...
For a lab to determine the change in oxidation state of Cl when KClO3 oxidizes I,...
For a lab to determine the change in oxidation state of Cl when KClO3 oxidizes I, NaOH was used to neutralize the solution before the Na2S2O3 titration. The solution was cooled in an ice bath until the air above the solution in the stoppered flask was "no longer purple". Why would it be expected that the solution is no longer purple after cooling? During the next step, the exothermic neutralization reaction may have caused the loss of I2. Why?
Kinetic energy causes disposition in the state of a substance. For instance, heat energy on a...
Kinetic energy causes disposition in the state of a substance. For instance, heat energy on a block of ice changes it first into water and finally into water vapor. Describe the process that ice on Mount Everest goes through when being heated from 10o Fahrenheit to 305o Kelvin. Explain how the energy requirements change at different steps of the heating curve. What are the energy transfers that happen in the ice on Mount Everest? How might temperature changes in the...
A supply line of steam at 0.8 MPa and quality of 0.95 (state 1) is mixing...
A supply line of steam at 0.8 MPa and quality of 0.95 (state 1) is mixing with steam at 0.8 MPa, 250 0C, and flowing at the rate of 1 kg/s (state 2) in a mixing chamber. After adiabatic mixing the flow rate is 2.3 kg/s (state 3), determine the phase of mixture at the exit when the pressure is 0.8 MPa. Draw schematic and P-v, T-v, and T-s diagrams to show the above processes accurately.
Use the steam tables to determine the specific volume and internal energy of water at each...
Use the steam tables to determine the specific volume and internal energy of water at each of the following conditions. If there is more than one phase present, give values of V and U for each phase. a) P=Psat, T=55°C b) P=0.4MPa, T=Tsat c) P=3.2MPa, T=Tsat
An investigation has been completed similar to the one on latent heat of fusion, where steam...
An investigation has been completed similar to the one on latent heat of fusion, where steam is bubbled through a container of water. Steam condenses and the lost energy heats the water and container. Use the following data to answer the question below:    Mass of the aluminum container 50 g Mass of the container and water 250 g Mass of the water 200 g Initial temperature of the container and water 20°C Temperature of the steam 100°C Final temperature...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT