Question

15 mol/h of steam 1 (gas, at 1.1 atm and 0oC) containing 25% (mol basis) propane...

15 mol/h of steam 1 (gas, at 1.1 atm and 0oC) containing 25% (mol basis) propane and rest butane is mixed with a second stream (gas, 1.1 atm and 70o C) containing 40% (mol basis) propane and rest butane. The output stream is 40 mol/h (gas, 1.1 atm). The relative enthalpies as a function of temperature (in oC) are

H (J/mol) for propane = 91 x T

H (J/mol) for butane = 121 x T

a) What is the composition of the output stream?

b) What is the temperature of the output stream, assumining no heat exchange with the surrounding?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air...
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air (ie 250% of the theoretical air) is used. The products of the combustion are carbon dioxide(gas) and vapor water along with the excess oxygen. Predict the adiabatic flame temperature, in degrees K, in the steady-flow combustion chamber. Use the thermodynamic data from your textbook, Appendix E for all the required data Textbook: Introductory Chemical Engineering Thermodynamics (Ed. 2) by Elliott, J. Richard, Lira, Carl...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by volume. It is to be fed to the combustion chamber in 10% excess air at 25ºC, where it is completely burnt to carbon dioxide and water. The flue gases produced are to be used to generate 5 bar steam from water at 90ºC. (a) Write balanced equations for the combustion of each component of the fuel gas. (b) Explain the need for excess air....
4.1A membrane made of 0.1 mm thick soft rubber separates pure O2 at 1 atm and...
4.1A membrane made of 0.1 mm thick soft rubber separates pure O2 at 1 atm and 25oC from air at 1.2 atm pressure. Determine the mass flow rate of O2 through the membrane per unit area and the direction of flow. Molar flow rate of oxygen is given by: ???? = ???????? / ??? (????1 ? ????2 ) where S is solubility of oxygen in rubber. The mass diffusivity of oxygen in rubber at 298 K is DAB = 2.1...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT