Question

Saturated steam at 200 C, 1000 kg/h is used to boil toluene in a heat exchanger....

Saturated steam at 200 C, 1000 kg/h is used to boil toluene in a heat exchanger. The toluene enters at 50 C, 1 bar, 3500 kg/h and leaves as vapor at 1 bar. The steam condensate leaving is saturated water at 200 C. Calculate the exit toluene temperature.

Science   Chemistry   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Question 4 Saturated steam at 227°C is used in a heat exchanger to preheat a reactor...
Question 4 Saturated steam at 227°C is used in a heat exchanger to preheat a reactor feed stream. (a) If the condensate (saturated liquid) is removed from the heat exchanger at 152°C and the flow rate is 1000 kg/h, how much heat (kJ) is transferred from the steam to heat up the reactor feed stream in one hour? (b) How much additional steam would be required if the condensate is removed at 227°C, instead of 152°C, for the same exit...
An adiabatic counterflow heat exchanger receives 0.3 m3/s of saturated steam vapor at 200 kPa and...
An adiabatic counterflow heat exchanger receives 0.3 m3/s of saturated steam vapor at 200 kPa and condenses it to a saturated liquid on the shell side.   Water enters the tubes at 25 C and leaves at 40 C.   Determine the second law efficiency for the heat exchanger.
Saturated steam at 350 C is used to heat a countercurrent stream of methanol vapor from...
Saturated steam at 350 C is used to heat a countercurrent stream of methanol vapor from 70C to 300C in an adiabatic heat exchanger. The flow rate of methanol is 6000 L (STP) / min, and the steam condenses and leaves the exchanger as liquid water at 80C. a) Calculate the necessary flow of the incoming steam in m 3 / min. b) Calculate the heat flux transferred from water to methanol (kW).
saturated steam at 300 C is used to heat countercurrently flowing stream of methanol vapor from...
saturated steam at 300 C is used to heat countercurrently flowing stream of methanol vapor from 65C to 260 C in and adiabatic heat exchanger. The flow rate of the methanol is 5500 standard liters per minute, and the steam condenses and leaves the heat exchanger as liquid water at 90 C. A) calculate the required flow rate of the entering steam in m^3/min. B) Calculate the rate of heat transfer from the water to the methanol (kW).
. An adiabatic heat exchanger receives 3 kg/s of R12 as a saturated vapor at 960...
. An adiabatic heat exchanger receives 3 kg/s of R12 as a saturated vapor at 960 kPa and condenses it to a saturated liquid at this pressure.   The cooling water at 100 kPa enters the heat exchanger at 20 C and leaves at 35 C.   Determine the heat transfer to the water in kW and the water flowrate in kg/s.   385.6 kW    6.09 kg/s
Problem #1 Saturated steam at 300°C is used to heat a counter-currently flowing stream of methanol...
Problem #1 Saturated steam at 300°C is used to heat a counter-currently flowing stream of methanol vapor from 65°C to 260°C in an adiabatic heat exchanger. The flow rate of the methanol is 5500 standard liters per minute (at STP), and the steam condenses and leaves the heat exchanger as liquid water at 90°C. a) Draw a diagram of the process. b) Calculate the required flow rate of the entering steam in m3/min. c) Calculate the rate of heat transfer...
Saturated steam at a gauge pressure of 3.00 bar is to be used to heat a...
Saturated steam at a gauge pressure of 3.00 bar is to be used to heat a stream of ethane. The ethane enters a heat exchanger at 16°C and 1.5 bar gauge pressure at a rate of 895 m3/min and is heated at constant pressure to 93°C. The steam condenses and leaves the exchanger as a liquid at 24.0°C. The specific enthalpy of ethane at the given pressure is 941 kJ/kg at 16°C and 1073 kJ/kg at 93°C.   You may take...
Saturated water vapor leaves a steam turbine at a flow rate of 1.47 kg/s and a...
Saturated water vapor leaves a steam turbine at a flow rate of 1.47 kg/s and a pressure of 0.51 bar. The vapor is to be completely condensed to saturated liquid in a shell-and-tube heat exchanger that uses city water as the cold fluid. The water enters the thin-walled tubes at 17oC and is to leave at 57.6 oC. Assuming an overall heat transfer coefficient of 2000 W/m2K, determine the required heat exchanger surface area and the water flow rate. cp,c...
A heat exchanger uses saturated steam at 375 K to heat cold water entering at 280...
A heat exchanger uses saturated steam at 375 K to heat cold water entering at 280 K and leaving at 301 K only the latent heat of vaporization is removed from the steam. i.e. the steam is condensed and saturated water exit the exchanger. a) what is the LMTD for a counter current heat exchanger? b) what is the LMTD for a parallel or cocurrent heat exchanger? c) if the counter current heat exchanger has a duty (Q) of 81000...
1) Water is heated by steam in a heat exchanger. The water comes in at .4...
1) Water is heated by steam in a heat exchanger. The water comes in at .4 MPa and 10°C and leaves at 110°C. flow rate of the water is 2 kg/s. 0.5 kg of steam comes in at a pressure of 0.6 MPa at 300°C, determine the exit temperature and state of the steam and rate of condensation if any
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT