Question

2 Determine the concentration of NaCl in a solution using the density of the solution Decide...

2 Determine the concentration of NaCl in a solution using the density of the solution

Decide which is the best piece of volumetric glassware to use to determine the concentration and density of a solution of NaCl.

You will have available to you the following: solid NaCl, distilled water, the contents of your cabinet and shared drawer, analytical balances, thermometers, a computer with Excel

describe the relationship between density and concentration.

I need procedures of this experiment. I have no idea where to start and set things up.

Please help!!

Thank you.

Homework Answers

Answer #1

1. Weigh out the mass of NaCl for solution number 1.

2. Tare the balance again (while the flask containing the salt is still on the balance).Remove the flask from the balance. Then add approximately 30 mL of distilled water to the flask and weigh it.

3.Thoroughly mix the solution by swirling or stirring with a glass stirring rod until all of the solid has dissolved.

4.Measure and record the temperature of the solution (to the nearest 0.1 oC

5.Measure the mass of a 10.00 mL aliquot (sample) of the standard solution.

6.Repeat the above steps for standard solutions 2-5.

7.Give the laboratory assistant a clean,dry 50 or 100 mL beaker for your unknown solution.

8.Measure the temperature of the unknown.

9.Measure the mass of a 10.00 mL aliquot of the unknown using the procedure described in step 5 above

.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
1. Determine the most accurate and precise piece of glassware devise a plan that will let...
1. Determine the most accurate and precise piece of glassware devise a plan that will let you determine which is more accurate and precise at measuring a liquid volume: a pipet or a buret. you will have the following at your disposal: distilled water, the contents of your cabinet and shared drawer, analytical balances, density of water at various temperatures chart, and thermometers. making sure you have at least three measurements for each piece of glassware. You will need to...
You will be preparing 100 mL of a NaCl(aq) solution using a volumetric flask. a. Determine...
You will be preparing 100 mL of a NaCl(aq) solution using a volumetric flask. a. Determine the mass of NaCl you need to prepare a 0.5 M aqueous solution. b. Determine the mass of NaCl you need to prepare a 2 M aqueous solution. (then): Using the numbers you calculated above, explain how you would prepare 100 mL of a NaCl solution of 0.5-2 M concentration.?
You determine the concentration of a solution of HCl by titration with NaOH. The titration reaction...
You determine the concentration of a solution of HCl by titration with NaOH. The titration reaction is: HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq) Using a volumetric pipet, you transfer 10.00 mL of the HCl solution into an Erlenmeyer flask, then dilute it with ~50 mL of water and add 3 drops of phenolphthalein. The endpoint is reached after you have added 44.00 mL of 0.1250 M NaOH solution from a buret. Calculate the molarity of the original HCl solution....
What is the concentration of the Vitamin C standard solution that you are making? Using the...
What is the concentration of the Vitamin C standard solution that you are making? Using the analytical balance in the instrument room, carefully weigh out about 125 mg of Vitamin C and place it in a 100-mL beaker in approximately 50 mL of water. It is not necessary for you to have exactly 125 mg, but it is important for you to know exactly how many mg you do have, and to make sure none of it is lost in...
The exact concentration of H2O2 in a solution that is nominally 6% w/v H2O2 can be...
The exact concentration of H2O2 in a solution that is nominally 6% w/v H2O2 can be determined by a redox titration with MnO4 – . A 25 mL aliquot of the sample is transferred to a 250 mL volumetric flask and diluted to volume with distilled water. A 25 mL aliquot of the diluted sample is added to an Erlenmeyer flask, diluted with 200 mL of distilled water and acidified with 20 mL of 25% v/v H2SO4. The resulting solution...
Procedure Reaction 1: Dissolving the Copper 1. Obtain a clean, dry, glass centrifuge tube. 2. Place...
Procedure Reaction 1: Dissolving the Copper 1. Obtain a clean, dry, glass centrifuge tube. 2. Place a piece of copper wire in a weighing paper, determine the mass of the wire and place it in the centrifuge tube. The copper wire should weigh less than 0.0200 grams. 3. In a fume hood, add seven drops of concentrated nitric acid to the reaction tube so that the copper metal dissolves completely. Describe your observations in the lab report. (Caution, Concentrated nitric...
I have provided the information for the lab below. I want to see the chemical reactions...
I have provided the information for the lab below. I want to see the chemical reactions that take place during each step of the experiment. So in the procedures when a chemical was added i would like to see what the products and byproducts that were formed. I also want to see one over all reaction for this experiment to just get an overview of what exactly is happening during the experiment. Thank you:) Part B: Synthesis of [Co(NH3)5Cl]Cl2 Objective:...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT