Question

In a water-air gas mixing system. Who is condensable steam?

In a water-air gas mixing system. Who is condensable steam?

Science   Chemistry   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K...
A mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K , then, saturated liquid enters at 12 bar and 80 kg/min. The exit conditions are 12 bar and 120 kg/min. Obtain the mass flow rate (kg/s) at which steam water enters, the temperature at the exit (C°) and the quality of substance at the exit. Ignore the changes of kinetic and potencial energy.
a mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K...
a mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K , then, saturated liquid enters at 12 bar and 80 kg/min. The exit conditions are 12 bar and 120 kg/min. Obtain the mass flow rate (kg/s) at which steam water enters, the temperature at the exit (C°) and the quality of substance at the exit. Ignore the changes of kinetic and potencial energy.
An industrial requires 1000kg/hr. of saturated steam vapor at 500kpa natural gas combustion products (use air...
An industrial requires 1000kg/hr. of saturated steam vapor at 500kpa natural gas combustion products (use air properties) at 200kp,400c are used to boil saturated liquid water which enters the adiabatic unit at 550kpa and combustion products leave at 200kpa,200c What is the mass flowrate of combustion products? What does the entropy change of the combustion gases? What is the change in the entropy of the boiling water?
An air conditioning system is to take in outdoor air at 283K and 30percent relative humidity...
An air conditioning system is to take in outdoor air at 283K and 30percent relative humidity at a steady rate of 45 m3/min and to condition it to 298K and 60% relative humidity. The outdoor air is first heated to 295K in the heating section and then humidified by the injection of hot steam in the humidifying section. Assuming the entire process takes place at a pressure of 100kPa, determine (i) the rate of heat supply in the heating section...
Consider a combined gas-steam power cycle. The topping cycle is a simple Brayton cycle that has...
Consider a combined gas-steam power cycle. The topping cycle is a simple Brayton cycle that has a pressure ratio of 7. Air enters the compressor at 15 ºC at a rate of 10 kg/s and the gas turbine at 950 ºC. The bottoming cycle is a reheat Rankine cycle between the pressure limits of 6 MPa and 10 kPa. Steam is heated in a heat exchanger at a rate of 1.15 kg/s by the exhaust gases leaving the gas turbine,...
A supply line of steam at 0.8 MPa and quality of 0.95 (state 1) is mixing...
A supply line of steam at 0.8 MPa and quality of 0.95 (state 1) is mixing with steam at 0.8 MPa, 250 0C, and flowing at the rate of 1 kg/s (state 2) in a mixing chamber. After adiabatic mixing the flow rate is 2.3 kg/s (state 3), determine the phase of mixture at the exit when the pressure is 0.8 MPa. Draw schematic and P-v, T-v, and T-s diagrams to show the above processes accurately.
Water is heated in a mixing chamber by mixing it with hot water coming from a...
Water is heated in a mixing chamber by mixing it with hot water coming from a heater. The mixing chamber loses heat to the surroundings at a rate of 5 kW. The hot water enters the mixing chamber at a rate of 1 kg/s. The mixed water leaves the chamber fully mixed. - The cold water enters the mixing chamber at 200 kPa and 20°C at a velocity of 3 m/s - The hot water enters at a pressure of...
In the manufacture of nitric acid, ammonia and preheated air are mixed to form a gas...
In the manufacture of nitric acid, ammonia and preheated air are mixed to form a gas containing 10 mole% NH3 at 600oC. (The ammonia is not preheated, since if it were, it will decompose to N2 and H2). The mixture is then catalytically oxidized to form NO2, which is absorbed in water to form HNO3. If ammonia enters the gas blending (mixing) unit at 25oC at a rate of 520 kg/h, and heat is lost from the mixer to its...
Preheating Air by Steam for Use in a Dryer. An air stream at 32.2 celsius is...
Preheating Air by Steam for Use in a Dryer. An air stream at 32.2 celsius is to be used in a dryer and is first preheated in a steam heater, where it is heated to 65.5 celsius. The air flow is 1000 kg mol/h. The steam enters the heater saturated at 148.9 celsius, is condensed and cooled, and leaves as a liquid at 137.8 celsius. Calculate the amount of steam used in kg/h.
A power plant generates 10 kg/s of waste steam at 100°C. This steam is condensed and...
A power plant generates 10 kg/s of waste steam at 100°C. This steam is condensed and cooled by mixing it with 150 kg/s of clean water. The clean water has an initial temperature of 20°C. What is the temperature of the combined stream?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT