Question

A fuel consists of 75% butane, 10% propane and 15% butene by volume. Calculate the net...

A fuel consists of 75% butane, 10% propane and 15% butene by volume. Calculate the net calorific value of the fuel/air mix at 25 deg C per m3 and per kmol

Homework Answers

Answer #1

Answer-

the weight of the fuel sample, the mass of the water and temperature rise of the water, the calorific value is calculated yielding the gross heat of combustion per unit mass of the sample.
The calorific value of propane-butane is 11950kcal/kg. Net calorific value (MJ m–3) at 25ºC of:

Air is 21% oxygen, 79% nitrogen by volume and 23.3% oxygen and
76.7% nitrogen by mass.
Atomic mass of C = 12, O = 16, N=14 and H = 1.

Butane (C4H10) = 111.7 MJ m–3
Butene (C4H8) = 105.2 MJ m–3
Propane (C3H8) = 85.8 MJ m–3

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by volume. It is to be fed to the combustion chamber in 10% excess air at 25ºC, where it is completely burnt to carbon dioxide and water. The flue gases produced are to be used to generate 5 bar steam from water at 90ºC. (a) Write balanced equations for the combustion of each component of the fuel gas. (b) Explain the need for excess air....
A gaseous fuel mixture consists of 21% propane (C3H8) and 79% butane (C4H10) by volume. Since...
A gaseous fuel mixture consists of 21% propane (C3H8) and 79% butane (C4H10) by volume. Since the total pressure of combustion products is 90 kPa a) Write the balanced combustion equation for the complete combustion of this fuel mixture. Calculate the theoretical (air-fuel ratio) and dew point temperature of the products. b) In case of combustion with 200% theoretical air, what is the air fuel rate and dew point temperature? c) If the air fuel ratio is 20, calculate the...
A gas contains 80.0 wt% propane, 15.0 wt% -butane, and the balance water. a. Write out...
A gas contains 80.0 wt% propane, 15.0 wt% -butane, and the balance water. a. Write out the balanced stoichiometric equations for complete and incomplete combustion. b. If 100 kg/h of this fuel is to be burned with 30% excess air, what is the required air feed rate (kmol/h)? Calculate the molar composition of the feed gas on both a wet and a dry basis and the ratio (mol H2O/mol dry gas). c. If 100 kg/h of this fuel is to...
A commercial process for the production of 1,3-butadiene consists of the dehydrogenation of 1-butene in the...
A commercial process for the production of 1,3-butadiene consists of the dehydrogenation of 1-butene in the presence of steam at high temperatures. It is desired to find the maximum conversion of 1-butene to 1,3- butadiene possible at 900 K and 1 bar in a reactor in which the feed consists of 15 moles of steam per mole of 1-butene. (a) Compute ΔG˚ and K for the dehydrogenation of 1-butene to 1,3-butadiene (b) Calculate the fraction of 1-butene converted to 1,3-butadiene...
. A twin-cylinder 2-stroke engine has a swept volume of 150 cm3 . The maximum power...
. A twin-cylinder 2-stroke engine has a swept volume of 150 cm3 . The maximum power output is 19 kW at 11,000 rpm. At this condition, the bsfc is .11kg/MJ and the gravimetric air/fuel ratio is 12:1. If ambient test conditions are 10 C, 1.03 bar and the fuel has a calorific value of 44 MJ/kg, calculate the bmep, the arbitrary overall efficiency and the volumetric efficiency.
1) A hot air balloon consists of a very large bag filled with heated air at...
1) A hot air balloon consists of a very large bag filled with heated air at 120.0 °C produced from a propane burner. It has a basket hanging under it in which several people can ride. The average hot air balloon has a volume of 2.80 × 103 m3 when fully inflated. a) Determine the work (in kJ) needed to inflate the balloon under an external air pressure of 1.00 atm. b) The specific heat of the air found in...
1. What would be a more appropriate name for 1 methyl butane? 2. A gas occupies...
1. What would be a more appropriate name for 1 methyl butane? 2. A gas occupies 600 ml at 0.75 atm pressure. What will be its volume, at constant temperature, if the pressure is changed to 760 mm Hg? 3. In Propane what is the structural geometry around each Carbon atom? 4. Give two reasons for the diversity of organic compounds. 5. How many moles of NH3 gas are present in a 1.00L flask at STP? 6. Identify the following...
Homework-9 Due: Q) A fuel plate is fabricated from 0.3 cm thick 1.5% enriched uranium. The...
Homework-9 Due: Q) A fuel plate is fabricated from 0.3 cm thick 1.5% enriched uranium. The cladding is 0.25 mm 304 stainless steel. The coolant saturation temperature is 260 oC. The average thermal neutron flux is 2.5 X 1014 neutrons/cm2 /s. The surface temperature of the clad is 350 oC. Assume any missing data to answer the following questions:. 1) Write an expression of the heat generated per unit volume 2 What is the heat flux at the surface of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
1. Calculate the thermoeconomic cost of the produced electricity using the internal combustion device described in...
1. Calculate the thermoeconomic cost of the produced electricity using the internal combustion device described in homework 7. with and without the heat exchanger. Use the results you calculated to answer this question. This question is focusing on the thermoeconomic costs. The electricity is produced for 10 hours a day, five days per week during a one year cycle. The following cost information is given for the internal combustion device. The cost of the device is $125,000 and it has...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT