Question

In a typical steady-state heat flow in a heated plate, the following statements are true except...

In a typical steady-state heat flow in a heated plate, the following statements are true except

>The difference equation is dependent on the constant h.

>The difference equation is independent of the coefficient of thermal diffusivity, k.

>The insulation and the thinness of the plate mean that heat transfer is limited to the x and y dimensions.

>The steady-state, boundary-value problems are characterized by elliptic PDE.

Math   Advanced-Math   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A square plate of 0.5 m length is heated to temperature of 383 K. Air at...
A square plate of 0.5 m length is heated to temperature of 383 K. Air at 293 K and 1 atm flows over the plate at 15 m/s. Calculate the total heat transferred. Determine the convection heat transfer coefficient, thermal boundary layer, and the velocity boundary layer at the trailing edge of the plate.
Solve the following exercise using the infinity plate method under convection. A large thermoplastic sheet, 10...
Solve the following exercise using the infinity plate method under convection. A large thermoplastic sheet, 10 mm thick, at an initial temperature of 20°C (293K), must be heated in an oven to mold it. The oven temperature is maintained at 100°C (373K), the maximum temperature to which the plastic can be subjected, and it is necessary to ensure that the temperature throughout the sheet reaches a minimum of 80°C (353 K) . Calculate the minimum time during which the foil...
A freshly baked loaf of bread (30cm long, 15cm high, 10 cm wide) is removed from...
A freshly baked loaf of bread (30cm long, 15cm high, 10 cm wide) is removed from an oven and set on the counter (assumed insulated) to cool. The bread is at 125°C initially (assume uniform) and the room is at 25°C. Thermal conductivity and diffusivity for bread are k=0.05 W/m•K and α=5x10-7 m2/s, and the convective heat transfer coefficient is h=10 W/m2K. (a) Write down the governing differential equation in three-dimension representing this problem. (b) Write down the boundary conditions...
Consider a large uranium plate of thickness 5 cm and thermal conductivity k = 28 W/m...
Consider a large uranium plate of thickness 5 cm and thermal conductivity k = 28 W/m K in which heat is generated uniformly at a constant rate of q˙ = 6 × 10^5 W/m^3 . One side of the plate is insulated while the other side is subjected to convection in an environment at 30◦C with a heat transfer coefficient of h = 60 W/m2 K. Considering six equally spaced nodes with a nodal spacing of 1 cm, (a) Sketch...
Homework-9 Due: Q) A fuel plate is fabricated from 0.3 cm thick 1.5% enriched uranium. The...
Homework-9 Due: Q) A fuel plate is fabricated from 0.3 cm thick 1.5% enriched uranium. The cladding is 0.25 mm 304 stainless steel. The coolant saturation temperature is 260 oC. The average thermal neutron flux is 2.5 X 1014 neutrons/cm2 /s. The surface temperature of the clad is 350 oC. Assume any missing data to answer the following questions:. 1) Write an expression of the heat generated per unit volume 2 What is the heat flux at the surface of...
you are using a silver spon to stir water that judtstarted boiling so that you can...
you are using a silver spon to stir water that judtstarted boiling so that you can achive a more even heat distribution inyour water. the spon is partially immeeesed in boiling water and thermometer in your kithen reads 27degc. the hanle of the spon hascross section of 2mmx 1 cmextends 15 cm in te air fromthe free surface of the water . the heat transfer codfficient at the exposedsirface of the spon handle is 3 /m2.k. A. determine the temperature...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT