Question

Easyuse Tool Co. manufactures an electric motor that it uses in several of its products. Management...

Easyuse Tool Co. manufactures an electric motor that it uses in several of its products. Management is considering whether to continue manufacturing the motors or to buy them from an outside source. The following information is available.

1. The company needs 12,000 motors per year. The motors can be purchased from an outside supplier at a cost of $21 per unit.

2. The unit cost of manufacturing the motors is $35, computed as follows.

Direct materials $ 96,000
Direct labor 120,000
Factory overhead:
Variable 90,000
Fixed 114,000
Total manufacturing costs $ 420,000
Cost per unit ($420,000 ÷ 12,000 units) $ 35

3. Discontinuing the manufacture of motors will eliminate all the raw materials and direct labor costs but will eliminate only 75 percent of the variable factory overhead costs.

4. If the motors are purchased from an outside source, machinery used in the production of motors will be sold at its book value. Accordingly, no gain or loss will be recognized. The sale of this machinery would also eliminate $6,000 in fixed costs associated with depreciation and taxes. No other reductions in fixed factory overhead will result from discontinuing the production of motors.

a-1. Prepare a schedule to determine the incremental cost or benefit of buying the motors from the outside supplier.

a-2. Would you recommend that the company manufacture the motors or buy them from the outside source?

b-1. Assume that if the motors are purchased from the outside source, the factory space previously used to produce motors can be used to manufacture an additional 4,000 power trimmers per year. Power trimmers have an estimated contribution margin of $8 per unit. The manufacture of the additional power trimmers would have no effect on fixed factory overhead.

b-2. Would this new assumption change your recommendation as to whether to make or buy the motors?

Homework Answers

Answer #1

Calculation of cost per unit if gone with purchase

Direct purchase cost =252000

Factory overhead

Virable =22500(90000×25%)

Fixed =108000(114000-6000)

Total cost=382500

Cost per unit =382500/12000=31.875

Manufacturing moters results manufacturing cost per unit is 35 if purchased from outside results 31.875 purchasing from outside is economic

If power trimmers are produced given it results contribution margine 8 per unit it results additional income of 4000×8=32000

If we gone with reduction of cost 382500-32000=350500

Cost per unit =350500/12000=29.21 it is economical so I choose purchase rather than manufacturing

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
XYZ Co. produces a part used in the manufacture of one of its products. The unit...
XYZ Co. produces a part used in the manufacture of one of its products. The unit product cost is $30, computed as follows: Direct materials, direct labor, and variable overhead $22 Fixed overhead $8 Total $30 An outside supplier has offered to provide the parts for only $25 each. The company estimates that 25% of the fixed manufacturing overhead cost above could be eliminated if the parts are purchased from the outside supplier. Based on these data, the per-unit dollar...
Supler Corporation produces a part used in the manufacture of one of its products. The unit...
Supler Corporation produces a part used in the manufacture of one of its products. The unit product cost is $20, computed as follows: Direct materials $ 6 Direct labor 7 Variable manufacturing overhead 3 Fixed manufacturing overhead 4 Unit product cost $ 20 An outside supplier has offered to provide the annual requirement of 7,200 of the parts for only $13 each. The company estimates that 50% of the fixed manufacturing overhead cost above could be eliminated if the parts...
Frederick Co. is thinking about having one of its products manufactured by an outside supplier. Currently,...
Frederick Co. is thinking about having one of its products manufactured by an outside supplier. Currently, the cost of manufacturing 5,000 units is: Direct material $ 62,000 Direct labor 47,000 Variable factory overhead 38,000 Factory overhead 52,000 If Frederick can buy 5,000 units from an outside supplier for $130,000, it should: Make the product because the cost of direct material plus direct labor of manufacturing is less than $130,000. Make the product because factory overhead is a sunk cost. Buy...
Frontier Company makes 13,000 units per year of a part it uses in the products it...
Frontier Company makes 13,000 units per year of a part it uses in the products it manufactures. The unit product cost of this part is computed as follows: Direct materials $ 13.50 Direct labor 21.10 Variable manufacturing overhead 3.30 Fixed manufacturing overhead 11.20 Unit product cost $ 49.10 An outside supplier has offered to sell the company all of these parts it needs for $42.60 a unit. If the company accepts this offer, the facilities now being used to make...
The Talbot Corporation makes wheels that it uses in the production of bicycles. Talbot's costs to...
The Talbot Corporation makes wheels that it uses in the production of bicycles. Talbot's costs to produce 90,000 wheels annually are: Direct materials $18,000 Direct labor $27,000 Variable manufacturing overhead $13,500 Fixed manufacturing overhead $57,000 An outside supplier has offered to sell Talbot similar wheels for $0.80 per wheel. If the wheels are purchased from the outside supplier, $12,000 of annual fixed overhead could be avoided and the facilities now being used could be rented to another company for $32,100...
The management of James Industries has been evaluating whether the company should continue manufacturing a component...
The management of James Industries has been evaluating whether the company should continue manufacturing a component or buy it from an outside supplier. A R200 cost per component has been determined as follows: R Direct materials 15 Direct labour 40 Variable manufacturing overhead 10 Fixed manufacturing overhead 35 Total 100 James Industries uses 4000 components per year. After Light SA has submitted a bid of R80 per component, some members of management feet they could reduce costs by buying from...
Bennys Corporation manufactures 20,000 wrenches each year. The following costs include direct materials of $5/unit; direct...
Bennys Corporation manufactures 20,000 wrenches each year. The following costs include direct materials of $5/unit; direct labor of $20/unit; variable manufacturing overhead of $2.50/unit and fixed manufacturing overhead of $11.00. An outside supplier has offered to sell 20,000 wrenches to Benny for $30 per wrench. If all of Benny's fixed manufacturing overhead is unavoidable, the "make or buy" decision would be: a) Buy from supplier because Benny has a total cost per unit to make lower than the supplier B)...
Han Products manufactures 30,000 units of part S- 6 each year for use on its production...
Han Products manufactures 30,000 units of part S- 6 each year for use on its production line. At this level of activity, the cost per unit for part S- 6 is: Direct materials . . . . . . . . . . . . . . . . . . . . . $ 3.60 Direct labor . . . . . . . . . . . . . . . . . . . . . ....
5. Han Products manufactures 30,000 units of part S- 6 each year for use on its...
5. Han Products manufactures 30,000 units of part S- 6 each year for use on its production line. At this level of activity, the cost per unit for part S- 6 is: Direct materials . . . . . . . . . . . . . . . . . . . . . $ 3.60 Direct labor . . . . . . . . . . . . . . . . . . . . ....
Han Products manufactures 17,000 units of part S-6 each year for use on its production line....
Han Products manufactures 17,000 units of part S-6 each year for use on its production line. At this level of activity, the cost per unit for part S-6 is:     Direct materials $ 3.80 Direct labor 6.00 Variable manufacturing overhead 3.60 Fixed manufacturing overhead 12.00 Total cost per part $ 25.40     An outside supplier has offered to sell 17,000 units of part S-6 each year to Han Products for $43.00 per part. If Han Products accepts this offer, the...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT